✕
✕
IZONIL EXTRA CG-042

IZONIL EXTRA CG-042

100% waterproof plastering mortar (resistant against water pressure 1 bar / 0.1 MPa with water penetration less than 1 mm) and drying plastering mortar (with high volume of micropores which allows permanent dehumidifying process of wet substrate). Meets the requirements of EN 998-1:2016 as general purpose mortar and as renovation plaster (except for parameter Compressive strength: CS IV). Provides long-term solution to a problem of water penetration on the surface of the wall (when applied on negative side) and long-term solution to a problem of water penetration to the wall (when applied on positive side) and simultaneously provides long-term solution of ventilation and drying of wet walls (when applied both on negative and positive side). It does not contain any harmful or toxic ingredients (suitable to be used in direct contact with drinking water).

Technical data sheet

Safety data sheet

 

 ADVANTAGES

  • World-unique plastering mortar simultaneously 100% waterproof, breathable and drying

  • Resistant against penetration of rain water and running water

  • Resistant against penetration of water under pressure up to 1 bar (tested according EN 12390-8)

  • Water penetration less than 1 mm under 1 bar water pressure during 72 hours test

  • Meets requirements for general purpose plastering mortar (EN 998-1:2016)

  • Meets requirements for renovation plastering mortar (EN 998-1:2016) except for parameter Compressive strength: CS IV

  • Highly breathable (water vapor diffusion coefficient < 8)

  • Excellent adhesion to the substrate with minimum waste during application

  • Suitable as finishing layer before painting (grain size 0 – 1,4 mm)

  • Resistant against salt crystallization and sulphur-resistant

  • Applicable on damp surface
  • Applicable manually or by plastering machine
  • Applicable above-ground and underground, externally and internally, positive and negative side
  • Non-toxic, suitable to be used in direct contact with drinking water

 

 

 USAGE

  • Vertical surfaces (brick walls, light concrete block walls, rough concrete walls)
  • Horizontal surface (concrete floors and concrete roofs)
  • Both for renovation of existing / historical buildings and new buildings:
  • Basements, cellars, shafts and underground parts of buildings
  • Wall plinths or whole wall areas internally and externally
  • Roof decks, balconies, terraces
  • Bathrooms, showers, toilets to prevent water penetration between floors
  • Concrete water tanks, swimming pools, fish ponds or other concrete water-storage facilities
Packaging:

23kg
Consumption:

2,5 m2 – 25 kg / 7 mm